We have all been there. Worked hours or maybe even days trying to get the perfect mix. Finally we feel it’s there. Perfect….that is until we compare it to a commercial record. For some reason it doesn’t sound as puncy, clear and crisp as that. What is wrong???

Here is a few tips that might steer you in the right direction.

Mixing is really about making room for all that is there. Most elements in a production takes up more space in the frequency spectrum than necessary.  A stereo mix is 3 dimensional so we have a lot of options to chose between when making space for a sound or instrument.

First is panorama. Panorama or pan is the space from left to right between the speakers. We can place our sound anywhere between the speakers. A golden rule is that dominant sounds should stay close to the center, like lead vocals. Also deeper bass sounds should be placed in the middle, kicks and bass. The rest can be placed anywhere you like. Try placing pairs of backing vocals hard left and right for a big stereo backing vocal sound. Also you can double a guitar part and place the first take left and the other take right for a much bigger sound. But don’t overdue this trick. Not all your sounds should sound big and wide. Use a combination of small and big sounds for the best blend. A neat trick to make a mix more interesting is to automate a panorama sweep for a single sound. You can do it as an effect and make it happen only once or twice or it can actually be part of the sound when playing.

The second dimension is height. From the deep low sounds like kick drum and bass to the highest treble sounds like hihat and high bells. The important thing here to be aware of is that many of the sounds you will be using do overlap in frequency, so to make the different instruments easier to distinguish, you will need to EQ some of the frequencies out that is not the main part of the sound. A good rule of thumb is to make sure that only the bass and kick has elements under 100 HZ. You can achieve that by inserting a high pass filter on the other instruments. It will help make the mix punch better. Also emphasize the main frequency of the individual sounds. Boost the lead vocals around 1Khz if you are having difficulties hearing the words. Make the hihat stand out by boosting 8Khz instead of turning up the main hihat fader. And so on….

The last dimension is depth. The dry sounds are close to you while you can move sounds further away by adding reverb. Make deep sounds dry and close up by keeping them dry. If you want the lead vocal to stand out, don’t add reverb but use delays instead. It will help making it in front and present but still add volume and lushness. Or if using reverb on vocals try adjusting the predelay in a matter so the reverb element comes  slightly later. It will give a 3D effect to the sound where you actually sense the vocal move from the front to the back when then reverb kicks in.  Also you can use reverb for mid to high frequency sounds like pad’s, strings, electric guitars and so on to move them further back in the room. Again you can adjust the predelay to give the sound a moving effect.

Clever use of all these elements will help making your mixes stand out and become a lot closer to the sound of your favorite reference mixes.

Happy mixing!

JJ.

Technorati Tags: audio production, hip hop tracks, Mixing, Music producer, Music production, Producer, sound mixing, track producer

The mix can make or break the presentation of a song. A great song with a bad production and mix, will have a tough challenge making it. But it is not really that hard to create a great sounding mix once you know a few guidelines. Here follows how I prepare for my Pop/R&B mixes.

The first thing I do after I finished my production and recording, is to bounce all my midi instruments into audio files, all starting from bar 1. It is not only just to free resources to use for plugins, but also to prepare my mindset for the mixing phase. Bouncing the files also assures me that my sessions will always sound the same whenever I open it - even years later after having changed or upgraded some of my instruments.

I like to keep my tracks in same order from song to song

. I always start from left with kick drums, snare, clap, hihats, percussion and cymbals and FX. Then it’s bass, guitars, percussive synths, pianos and last pads and strings. The vocals I put on the right side starting with lead, dubs, addlibs and finally bv’s. After all the audio tracks I have my groups, FX returns and last the master fader.

First step is to break the mix down into sections eg. drums, bass, guitars, keys and vocals. Focusing on just a part of the picture gives clarity instead of confusion.

I like to create the following 7 groups for my Pop/R&B mixes: Main Drums, Cymbals & SFX, Bass, Percussive Synths & Keys, Strings and Pads, Lead vocals & addlibs, BV’s.

I also set up a few fx channels, 3 different reverbs, 2-3 different delay/echos, chorus and other modulation. If I need more during mixing I can always add them later.

Once you have your session set up the like this, a good tip is to save the session as a template. Then you don’t have to go through this process every time, but can simply open the template and add all the audio files you bounced.

Look out for my next article where I talk about mixing the drums.

Be Sure To Check Out My Profile & Music On MySpace!

Technorati Tags: Mixing, Music production, Templates